One thing begets another

You know how you embark on a project and once you’re done,  it has created a new list of projects?  Kinda like when you remodel your kitchen and you do the cabinets… and soon as it’s done, the floor now needs to be done.

You read about my stained glass door here … https://kritterspaw.com/2018/12/10/stained-glass-door/ 

The door came out great, and is now a centerpiece in the house.  I was already planning on building a stained glass floor lamp, but something simple.  With the door completed, and the elks peering in on us…  our lamp design took another turn.  Why not use animals from our forest to grace our lamp.

So I began the task of drawing up patterns for 4 panels….

eagle patt_IR.jpg

There would be an eagle, a squirrel, hummingbirds, and a pygmy owl.

With the patterns drawn, the pattern pieces had to be made.. and glass had to be cut.

IMG_20190304_093320993_IR.jpg

IMG_20190304_093326610_IR.jpg

IMG_20190122_144001504_IR.jpg

I did one panel at a time… pattern, glass cut, grind, foil / lead, solder, pack, repeat four times.

IMG_20190113_144053401~2_IR.jpg

IMG_20190308_093935986_IR.jpg

IMG_20190202_090103967_IR.jpg

Once the glass was cut and ground, each piece had to be foiled or leaded.

IMG_20190123_142040217_IR.jpg

After it was leaded, all the joints had to be soldered, and then it was packed with a window caulking and glazed with a gypsum powder.

IMG_20190315_102554174_IR.jpg

All to make a final glass panels to ready for the wood working portion of the project.

IMG_20190201_092558214_IR.jpg

IMG_20190224_105057031_IR.jpg

IMG_20190315_104528951_HDR_IR.jpg

On to the next phase.

To be continued…..

 

Advertisements

Fall Trees

People call us ‘crafty’.  I actually resent that term.  When you’re using jackhammers and shoveling rock, building pizza ovens and garages, ‘crafty’ is the last thing you feel you are.

But yesterday, I must even admit, I practiced ‘crafty’.

I saw this little project, I got a wild hair, and decided to make some myself.

It’s a little ‘crafty’ table ornament made with readily accessible resources – sticks, twigs, and branches.

base_IR.jpg

We started cutting branches into little rounds which I then brushed with Thompson water seal, and then drilled a hole in the center (but not all the way through).

trees_IR.jpg

I cut little tree-like twigs and fired up the hot glue gun.  I think when the hot glue gun comes out, you are squarely in the craft zone.

And cut tons of little paper cut-outs of oak leaves with our handy leaf punch (doesn’t everyone have one of those laying around – available at Michael’s and JoAnn’s).

leaves_IR.jpg

leaves2_IR.jpg

With glue gun in hand, I glued the little twig trees into the branch bases… and the paper cut-out leaves onto the trees.

line o treees_IR.jpg

And, wa-la.  Fall tree table ornaments.

Ok… maybe I am a little crafty.  But just today.